Energy efficiency
The building is energy efficient thanks to the latest materials used in the manufacture of wall structures, making it a building with almost zero energy consumption.
Price-quality ratio
Now you don't need to go through the long, laborious, and expensive processes of classical construction, because Hata Prefab has managed to optimize all of this as much as possible and offer you much more.
HATA PREFAB is an advanced, innovative technology that, with its appearance, has actually divided construction into BEFORE and AFTER.
If you dream of a home and you are worried about doubts due to old stereotypes that building a house is very difficult, time-consuming and expensive, then Hata will help you to dispel all doubts, now you do not need to resort to long, laborious and expensive processes of classical construction, because Hata was able to optimize all this as much as possible and offer you much more.
We use only environmentally friendly, certified materials of European origin for the manufacture of our houses. The house is made of KVH wood, which is pre-dried and treated with fire retardant. In the middle, the walls are insulated with mineral insulation. On both sides, the walls are lined with fermacell structural boards, which are glued together with a special adhesive to create a solid monolithic structure. Fermacell structural gypsum fiber boards are an innovative, versatile building material that can be used for walls, ceilings and floors.
AND NOW EVERYTHING IS MORE DETAILED:
Optimization is a fundamental prerequisite. Quality and timing at an affordable price
The state-of-the-art technologies we use allow us to create housing of exceptional quality in a relatively short time. It is important that the speed of work does not increase the price. HATA PREFAB is a guarantee of low construction costs, and our houses are environmentally friendly. It has everything you need, but without unnecessary elements that generate additional costs.
We focus on eco-friendly solutions and ZEROENERGY construction.
Do you like to take care of nature? Are you frugal? HATA PREFAB will help you! Our prefabricated houses are built from environmentally friendly and latest materials. Manufacturing is carried out in a production facility where each element of the house goes through all stages of testing under the constant technical supervision of specialists. All this makes the building largely self-sufficient, environmentally friendly, energy efficient and allows you to significantly save your finances and, most importantly, time.
What makes HATA PREFAB special?
-
1. Convenience
An ideal home is a comfortable home. With us, you can be sure that this will be the case. You can adapt each Optima Home project to your own needs to make life in it comfortable for you and other residents. You can decide on the size you need and choose the construction elements according to your own expectations and taste.
-
2. Ecology
HATA PREFAB is an environmentally friendly house. It is energy efficient thanks to the latest materials used in the manufacture of wall structures, which makes it a building with almost zero energy consumption. In addition, the main building material used in its construction is KVH wood - one of the most environmentally friendly building materials.
-
3. Savings
The cost of our houses is really low compared to other offers on the market. And the innovative method of building a house, borrowed from European countries and time-tested, makes it possible to get a ready-made house according to European standards in a short time.
Section of the prefabricated outer wall
- Fermacell gypsum fiber board – 12.5 mm.
- Knauff Naturoll mineral wool – 150 mm.
- Dorken Delta-Dawi GP vapor barrier – 180 g/m².
- Wooden KVH beam – 150 mm.
- Fermacell gypsum fiber board – 12.5 mm.
- Facade adhesive for gluing expanded polystyrene Ceresit СТ83 – 5 mm.
- HIRSCH Porozell expanded polystyrene with added graphite – 100 mm.
- Plaster reinforcing mesh Ceresit СТ325 – 160 g/m².
- Facade adhesive for reinforcement of expanded polystyrene Ceresit СТ85 – 2 mm.
- Decorative silicone plaster Ceresit СТ74 – 2.0 mm.
Section of the prefabricated inner wall
- Fermacell gypsum fiber board – 12.5 mm.
- Wooden KVH beam – 100 mm.
- Knauff Naturoll mineral wool – 100 mm.
- Fermacell gypsum fiber board – 12.5 mm.
Roof section
- RUUKKI CLASSIC METAL TILE.
- Metal drip tray.
- KROP DRAINAGE SYSTEM (PVC).
- Wooden KVH beam – 200 mm.
- Dorken Delta-Maxx Plus waterproofing diffusion membrane – 190 g/m².
- Wooden crate, wooden counter crate.
- Roof soffit KROP.